Posts
Buying a new high-end CNC router that is manufactured in Europe or the United States of America can cost someone between 125,000 and 250,000 USD. Even routers classified in the mid-range still cost between 75,000 and 100,000 USD. This is a lot of money that most small shops and companies cannot afford. That is why if one cannot afford new high-end or mid-range models of these machines, they should opt for used or second hand ones. When one needs Used CNC Router Nevada offers the perfect location to visit.
A used machine can be bought from another shop or from a dealer. One stands to save a lot of money when they opt for this option. However, this option comes with risks of its own. Even if the seller has regularly performed preventive maintenance as required, there is the risk that replacements for certain consumable parts may not be available. Although this is not obvious, there is a huge chance of it being true.
The controller and its electronics is the one that is most likely to lack consumable parts for replacement available in the market. When buying from shop to shop, such purchases are not covered by a warranty. Even dealers are not able to provide the same warranties that manufacturers provide. Dealer warranties are limited in nature.
Another down side that is associated with buying a second hand product is that there may be many upgrades that may be required right after purchase. These upgrades can raise the overall cost of buying and operating the equipment a lot. This is true especially in the longer term. However, there are a few ways that one can use to minimize the risks associated with buying second hand CNC routers.
Acquiring the machine from a reputable dealer that repairs and offer maintenance services is one way of managing risks. Such dealers are good because the machines they sell are well maintained. In addition to that, parts that wear out due to extended use are replaced by the dealer. Cooling fans, spindles, automatic tool changers and monitors are some of the parts that wear out due to extended use. Wiring, guide systems and control boards also wear out over time.
Buying a refurbished machine is another good way of managing the risks. Refurbishing a piece of equipment involves dismantling it to the core before it is rebuilt back up. Refurbishing cannot be done to all machines. For a machine to be refurbished, it must be of high quality with unique features. Part of refurbishing involves having the chassis and gantry repainted and sandblasted.
Other tasks involved in refurbishing are having all parts inspected and replaced if necessary. Examples of parts that are usually inspected and replaced whenever necessary include propulsion systems, trucks, and linear guides. After inspection, replacement, and reassembly of the machine, it is tested thoroughly. By the time the machine gets out of the refurbishing facility to be sold, it is almost as good as new.
Refurbished machines can be bought from companies that deal with refurbishing, from dealers, or from original manufacturers. The best option is to buy from original manufacturers. Similarly, if one has a machine that is failing, they can have the manufacturer rebuild it from the ground up.
A used machine can be bought from another shop or from a dealer. One stands to save a lot of money when they opt for this option. However, this option comes with risks of its own. Even if the seller has regularly performed preventive maintenance as required, there is the risk that replacements for certain consumable parts may not be available. Although this is not obvious, there is a huge chance of it being true.
The controller and its electronics is the one that is most likely to lack consumable parts for replacement available in the market. When buying from shop to shop, such purchases are not covered by a warranty. Even dealers are not able to provide the same warranties that manufacturers provide. Dealer warranties are limited in nature.
Another down side that is associated with buying a second hand product is that there may be many upgrades that may be required right after purchase. These upgrades can raise the overall cost of buying and operating the equipment a lot. This is true especially in the longer term. However, there are a few ways that one can use to minimize the risks associated with buying second hand CNC routers.
Acquiring the machine from a reputable dealer that repairs and offer maintenance services is one way of managing risks. Such dealers are good because the machines they sell are well maintained. In addition to that, parts that wear out due to extended use are replaced by the dealer. Cooling fans, spindles, automatic tool changers and monitors are some of the parts that wear out due to extended use. Wiring, guide systems and control boards also wear out over time.
Buying a refurbished machine is another good way of managing the risks. Refurbishing a piece of equipment involves dismantling it to the core before it is rebuilt back up. Refurbishing cannot be done to all machines. For a machine to be refurbished, it must be of high quality with unique features. Part of refurbishing involves having the chassis and gantry repainted and sandblasted.
Other tasks involved in refurbishing are having all parts inspected and replaced if necessary. Examples of parts that are usually inspected and replaced whenever necessary include propulsion systems, trucks, and linear guides. After inspection, replacement, and reassembly of the machine, it is tested thoroughly. By the time the machine gets out of the refurbishing facility to be sold, it is almost as good as new.
Refurbished machines can be bought from companies that deal with refurbishing, from dealers, or from original manufacturers. The best option is to buy from original manufacturers. Similarly, if one has a machine that is failing, they can have the manufacturer rebuild it from the ground up.
About the Author:
You can find an overview of the advantages and benefits of purchasing a used CNC router Nevada companies sell at http://www.capitalequipmentinc-us.com/inventory right now.
No comments:
Post a Comment