Posts
Protection from inferno is necessary for every building. Every building occupant is entitled to the right to be protected in case one breaks out. Properties will also suffer less damage if the necessary measures are put in place. Fire sprinkler service Dallas ensures the building stays compliant to safety codes. It is not enough for a building to have protection, the measures must be well maintained at all times.
An annual inspection would be sufficient but more would be preferable. Inspection should also be done every time the water meter is modified or if a new one is installed. The same should be done if the occupancy of the building is changed or if remodeling is done on the building. An inspection is also in order if there are changes or disruptions in water supply.
The head should not be painted, neither should one hang things from it. The latter seems obvious but no harm spelling it out anyway. There should be at least 18 inches of room given below the head. This will allow proper action by the fixture. As soon as it is suspected that there could be damage or malfunction, it must be reported. Often check that the control valves are open.
Some tenants do not adhere to the regulations and will therefore not perform the inspections and maintenance as required. To ensure one is not moving into a death trap, they should check for signs of inspection. Maybe a tag somewhere or a head that does not look neglected. After all is signed and sealed, one should perform an inspection of their own. This is just a matter of safety.
One should know a few simple things about the system even as they get a professional to handle things. For example, is the system a wet, dry or alternate? A wet system uses water. A dry system uses air. This is used in buildings that are not heated as the water could freeze inside the reservoir. An alternate is a system that uses both water and air. Air in the cold months and water in the warmer months.
One may also want to know what material the piping is made of. This is especially important if one is moving into a new building. They may want to upgrade the pipes. Some pipe materials might not be suitable for the system.
Also, learn about the system control. Is there a mechanism in place to ensure that the control valves always stay open? This should prevent accidental locking at inopportune times. Is there backflow protection to ensure prevention of contamination? Most of the aspects of system control are quite technical but no harm knowing what is what.
If a building has this form of protection but does not conduct regular inspection and maintenance, insurance companies assume there is no protection at all. However, with protection one may get discounts from some insurance companies. Add this to the peace of mind that comes with knowing one has protection ready to pounce.
An annual inspection would be sufficient but more would be preferable. Inspection should also be done every time the water meter is modified or if a new one is installed. The same should be done if the occupancy of the building is changed or if remodeling is done on the building. An inspection is also in order if there are changes or disruptions in water supply.
The head should not be painted, neither should one hang things from it. The latter seems obvious but no harm spelling it out anyway. There should be at least 18 inches of room given below the head. This will allow proper action by the fixture. As soon as it is suspected that there could be damage or malfunction, it must be reported. Often check that the control valves are open.
Some tenants do not adhere to the regulations and will therefore not perform the inspections and maintenance as required. To ensure one is not moving into a death trap, they should check for signs of inspection. Maybe a tag somewhere or a head that does not look neglected. After all is signed and sealed, one should perform an inspection of their own. This is just a matter of safety.
One should know a few simple things about the system even as they get a professional to handle things. For example, is the system a wet, dry or alternate? A wet system uses water. A dry system uses air. This is used in buildings that are not heated as the water could freeze inside the reservoir. An alternate is a system that uses both water and air. Air in the cold months and water in the warmer months.
One may also want to know what material the piping is made of. This is especially important if one is moving into a new building. They may want to upgrade the pipes. Some pipe materials might not be suitable for the system.
Also, learn about the system control. Is there a mechanism in place to ensure that the control valves always stay open? This should prevent accidental locking at inopportune times. Is there backflow protection to ensure prevention of contamination? Most of the aspects of system control are quite technical but no harm knowing what is what.
If a building has this form of protection but does not conduct regular inspection and maintenance, insurance companies assume there is no protection at all. However, with protection one may get discounts from some insurance companies. Add this to the peace of mind that comes with knowing one has protection ready to pounce.
About the Author:
Protect your business premises by using a dependable fire sprinkler service Dallas area. To know more just visit the following website at http://www.rhinofireprotection.com.
No comments:
Post a Comment