Posts
Dry ice is a method of cleaning that is classified under carbon dioxide cleaning. This method makes use of the solid form of carbon dioxide to clean surfaces. The solid carbon dioxide is made in the form of pellets, which are pressurized and accelerated towards dirty surfaces to clean them. The pellets are accompanied with a pressurized stream of air. When in need of Dry Ice Blasting Hazelton should be visited.
There is similarity in this method with other media blasting methods. Examples of such methods are sand, plastic bead and soda blasting. The difference among the various methods is majorly the kind of abrasive media used. However, all these methods make use of abrasive media at very high levels of pressure. Normally, the type of abrasive material used is what is based upon to name the process.
The solid carbon dioxide pellets used in this method always comprises of reclaimed carbon dioxide. Usually, the reclaimed carbon dioxide is derived from other industrial procedures. Therefore, the gas can be acquired easily which also makes the whole process cheaper. Carbon dioxide gas is not classified as a greenhouse gas, making it friendly to the environment.
There are several advantages that are associated with this method of cleaning. One advantage is that it is approved for use by various agencies in the United States, which are concerned with protecting consumers and the environment. The major agencies that have approved the use of carbon dioxide as an abrasive media are USDA, FDA, and EPA. Thus, users do not have to worry about obtaining government approval before they can use this abrasive media.
Another advantage is that the method eradicates exposure to chemical cleaning agents by the employees. There are cleaning agents that are always very dangerous when one is exposed to them. Therefore, there is no need for a company to get stringent government permits and approvals. This makes the whole process cheaper and easier. Using this method does not create any secondary waste or residue.
The fact that dry ice pellets never melt like most solid gasses is what prevents creation of residues and wastes on surfaces being cleaned. Rather, the pellets undergo sublimation. This conversion occurs immediately after the surface being cleaned has been hit by the pellets. Heat is created from the impact making the pellets to sublime into the air. The need for doing serious clean-up once cleaning has been completed is eliminated.
The only waste created at the work site comprises of dislodged media from the surface. A vacuum cleaner can clean such dirt easily. Also, washing away the dirt is possible if such action is allowed for by its nature. Usually, the pellets that find use in this process are propelled at speeds that are very high, making the process risky. One should wear protective gear for physical harm to be prevented.
One should wear gloves, helmet, boots, and apron. Since carbon dioxide is a cryogenic gas, it is important to ensure that the site of work is properly ventilated. This is important because a small amount of dry ice can sublime to form a very huge amount of carbon dioxide gas. Thus, suffocation can occur very easily if necessary precautions are not taken.
There is similarity in this method with other media blasting methods. Examples of such methods are sand, plastic bead and soda blasting. The difference among the various methods is majorly the kind of abrasive media used. However, all these methods make use of abrasive media at very high levels of pressure. Normally, the type of abrasive material used is what is based upon to name the process.
The solid carbon dioxide pellets used in this method always comprises of reclaimed carbon dioxide. Usually, the reclaimed carbon dioxide is derived from other industrial procedures. Therefore, the gas can be acquired easily which also makes the whole process cheaper. Carbon dioxide gas is not classified as a greenhouse gas, making it friendly to the environment.
There are several advantages that are associated with this method of cleaning. One advantage is that it is approved for use by various agencies in the United States, which are concerned with protecting consumers and the environment. The major agencies that have approved the use of carbon dioxide as an abrasive media are USDA, FDA, and EPA. Thus, users do not have to worry about obtaining government approval before they can use this abrasive media.
Another advantage is that the method eradicates exposure to chemical cleaning agents by the employees. There are cleaning agents that are always very dangerous when one is exposed to them. Therefore, there is no need for a company to get stringent government permits and approvals. This makes the whole process cheaper and easier. Using this method does not create any secondary waste or residue.
The fact that dry ice pellets never melt like most solid gasses is what prevents creation of residues and wastes on surfaces being cleaned. Rather, the pellets undergo sublimation. This conversion occurs immediately after the surface being cleaned has been hit by the pellets. Heat is created from the impact making the pellets to sublime into the air. The need for doing serious clean-up once cleaning has been completed is eliminated.
The only waste created at the work site comprises of dislodged media from the surface. A vacuum cleaner can clean such dirt easily. Also, washing away the dirt is possible if such action is allowed for by its nature. Usually, the pellets that find use in this process are propelled at speeds that are very high, making the process risky. One should wear protective gear for physical harm to be prevented.
One should wear gloves, helmet, boots, and apron. Since carbon dioxide is a cryogenic gas, it is important to ensure that the site of work is properly ventilated. This is important because a small amount of dry ice can sublime to form a very huge amount of carbon dioxide gas. Thus, suffocation can occur very easily if necessary precautions are not taken.
About the Author:
You can find details about the advantages and benefits you get when you use professional dry ice blasting Hazelton services at http://www.asmenvironmental.com today.
No comments:
Post a Comment