Posts
One of the very important components of record players is the magnetic cartridge. This serves as a playback of analog sounds which are referred to as records. And now, it is commonly known as a turntable. Some terms referred to this before are gramophone and phonograph. Cartridge is also known a pick up, an electro mechanical device type that converts vibrational energy into an electrical energy. Electrical signals which are created are amplified and converted to sounds by the loud speakers.
Some other components include styluses, cantilever, coils, body, and magnets. A stylus which is being mounted will serve as contact to record grooves. Most styluses are made of industrial gemstones or may be small polished diamonds. A cantilever will serve as support to stylus and will transmit vibrations to the coil or magnet assembly. Cantilevers before were made of boron or aluminum. There are also other turntable cartridge types containing detachable styluses and cantilever, which is an advantage since there will be no need of replacing or removing cartridges when styluses worn out.
Cartridges come into many types, each different sizes and shapes. Moving magnet and moving coil are the two most common principles of technologies that powers the types. Moving coils have more advanced designs and also, it is more expensive compared to moving magnets. There are some MC variants that have cheap designs, but it definitely have poor sounds.
Stylus cantilevers in magnetic cartridges often carry magnets permanently placed between two coils that are fixed in an electromagnetic generator form. If a magnet vibrates responding the stylus, it induces some current. Since magnets are made small and have a little mass, it cannot be connected to a generator mechanically and styluses that are adjusted will be following the grooves and would require a lesser amount of tracking force.
Magnetic types that are induced and also the iron types have a moving iron piece or ferrous alloy types. These are connected to the cantilevers instead of the magnets. The magnet which is permanent and bigger is positioned on top of the coils that provides the required magnetic flux.
The MC cartridges design is an electromagnetic generator. Unlike the MM design, the coils and the magnet are arranged in a reverse manner. The coil is attached to the stylus and it moves within the constant magnet. A coil is made from a very fine wire and are mostly tiny. However, there may also be some MC cartridges in which the output is the same with the MM cartridges.
Another one is a moving micro cross type of cartridge. The MMC design is said to be one variant of MI design. Both coils and magnets stay in one area while the micro cross goes with stylus.
Another type is the London Decca cartridge. This has a unique design and it has fixed coils and magnets. Its styluses have diamond tips, have short iron, and have an L shaped cantilever made of non magnetic steel.
The iron is positioned very near to the stylus tip, thus, resulting to an accurate tracking of the motions. The engineers of this type referred this tracking as a positive scanning. These types are usually very musical.
Some other components include styluses, cantilever, coils, body, and magnets. A stylus which is being mounted will serve as contact to record grooves. Most styluses are made of industrial gemstones or may be small polished diamonds. A cantilever will serve as support to stylus and will transmit vibrations to the coil or magnet assembly. Cantilevers before were made of boron or aluminum. There are also other turntable cartridge types containing detachable styluses and cantilever, which is an advantage since there will be no need of replacing or removing cartridges when styluses worn out.
Cartridges come into many types, each different sizes and shapes. Moving magnet and moving coil are the two most common principles of technologies that powers the types. Moving coils have more advanced designs and also, it is more expensive compared to moving magnets. There are some MC variants that have cheap designs, but it definitely have poor sounds.
Stylus cantilevers in magnetic cartridges often carry magnets permanently placed between two coils that are fixed in an electromagnetic generator form. If a magnet vibrates responding the stylus, it induces some current. Since magnets are made small and have a little mass, it cannot be connected to a generator mechanically and styluses that are adjusted will be following the grooves and would require a lesser amount of tracking force.
Magnetic types that are induced and also the iron types have a moving iron piece or ferrous alloy types. These are connected to the cantilevers instead of the magnets. The magnet which is permanent and bigger is positioned on top of the coils that provides the required magnetic flux.
The MC cartridges design is an electromagnetic generator. Unlike the MM design, the coils and the magnet are arranged in a reverse manner. The coil is attached to the stylus and it moves within the constant magnet. A coil is made from a very fine wire and are mostly tiny. However, there may also be some MC cartridges in which the output is the same with the MM cartridges.
Another one is a moving micro cross type of cartridge. The MMC design is said to be one variant of MI design. Both coils and magnets stay in one area while the micro cross goes with stylus.
Another type is the London Decca cartridge. This has a unique design and it has fixed coils and magnets. Its styluses have diamond tips, have short iron, and have an L shaped cantilever made of non magnetic steel.
The iron is positioned very near to the stylus tip, thus, resulting to an accurate tracking of the motions. The engineers of this type referred this tracking as a positive scanning. These types are usually very musical.
About the Author:
Find an overview of the reasons why you should buy record player cartridges online and view our turntable cartridge selection at http://www.needlefinder.net now.
No comments:
Post a Comment